Evaluation of Seismic Performance Based on A Direct Displacement-based Method
Abstract
Keywords
Full Text:
PDFReferences
A. B. Habieb, G. Milani, Tavio, and F. Milani, “Low Cost Rubber Seismic Isolators for Masonry Housing in Developing Countries,†AIP Conf. Proc., vol. 1906, no. 5, pp. 647–653, 2017.
U. Wijaya, R. Soegiarso, and Tavio, “Seismic Performance Evaluation of a Base-Isolated Building,†Int. J. Civ. Eng. Technol., vol. 10, no. 1, pp. 285–296, 2019.
American Society of Civil Engineers, “Minimum Design Loads and Associated Criteria for Buildings and Other Structures,†ANSI/ASCE Stand., pp. 1–822, 2017.
ATC-40, “Seismic Evaluation and Retrofit of Concrete Buildings,†Appl. Technol. Counc. Redw. City, Calif., vol. 1, 1996.
FEMA 356, “Prestandard and Commentary for the Seismic Rehabilitation of Buildings,†Fed. Emerg. Manag. Agency, Washingt. DC, no. 1, pp. 1–518, 2000.
FEMA 440, “Improvement of Nonlinear Static Seismic Analysis Procedures,†Fed. Emerg. Manag. Agency, Washingt. DC, vol. 440, no. June, p. 392, 2005.
FEMA 451B, “NEHRP Recommended Provisions: Instructional Materials (FEMA 451B),†Fed. Emerg. Manag. Agency, Washingt. DC, pp. 1–27, 2006.
M. A. P. Handana, R. Karolina, and Steven, “Performance Evaluation of Existing Building Structure with Pushover Analysis,†IOP Conf. Ser. Mater. Sci. Eng., vol. 309, no. 1, 2018.
P. Moustafa, K. M. Zidan, T. Mohamed, and A. Rahman, “Seismic Analysis of Buildings Using Direct Displacement Based Design Method,†IOSR J. Mech. Civ. Eng., vol. 13, no. 6, pp. 97–112, 2016.
L. Rahul, “A Study on Pushover Analysis Using Eurocode Based Capacity Spectrum Method,†16th World Conf. Earthq. Eng., vol. 45, no. January, pp. 1–13, 2017.
J. Carillo, G. Gonzales, and A. Rubiano, “Displacement Ductility for Seismic Design of RC Walls for Low-Rise Housing,†Lat. Am. J. Solids Struct., vol. 11, no. 4, pp. 725–737, 2014.
Y. Lu, I. Hajirasouliha, and A. M. Marshall, “Direct Displacement-Based Seismic Design of Flexible-Base Structures Subjected to Pulse-Like Ground Motions,†Eng. Struct., vol. 168, no. April 2017, pp. 276–289, 2018.
T. J. Sullivan, M. J. N. Priestley, and G. M. Calvi, “Direct Displacement-Based Design of Frame-Wall Structures,†J. Earthq. Eng., vol. 10, no. October 2014, pp. 91–124, 2006.
M. J. N. Priestley, G. M. Calvi, and M. J. Kowalsky, “Displacement-Based Seismic Design of Structures,†IUSS Press, 2007.
L. Yan and J. Gong, “Development of Displacement Profiles for Direct Displacement Based Seismic Design of Regular Reinforced Concrete Frame Structures,†Eng. Struct., vol. 190, no. October 2018, pp. 223–237, 2019.
Badan Standardisasi Nasional, “SNI 1726:2012 Tata Cara Perencanaan Ketahanan Gempa untuk Struktur Bangunan Gedung dan Non Gedung,†BSN, pp. 1–138, 2012.
DOI: http://dx.doi.org/10.18517/ijaseit.9.5.7932
Refbacks
- There are currently no refbacks.
Published by INSIGHT - Indonesian Society for Knowledge and Human Development