An Experimental Study of Bending Behaviour of Double Channel and Hollow Sections of Light Gauge Steel
Abstract
Keywords
Full Text:
PDFReferences
W.W. Yu and R.A. LaBoube, Cold-Formed Steel Design, 4th Ed. New York, US: John Wiley & Sons, 2010.
S. Mohammad, M.Md. Tahir, C.S. Tan and P. N. Shek, “Experimental Investigation on Wide-Span Cold-Formed Steel Roof Truss Systemâ€, Applied Mechanics and Materials, vols. 166-169, pp. 1304-1307, 2012.
Y. Li, Z. Shen, X. Yao, R. Ma and F. Liu, “Experimental Investigation and Design Method Research on Low-Rise Cold-Formed Thin-Walled Steel Framing Buildingsâ€, Journal of Structural Engineering, vol.139, issue 5, pp 818 – 836, May 2013.
D.H. Bondok and H.A. Salim, “Failure capacities of cold-formed steel roof trusses end-connectionsâ€, Thin-Walled Structures, vol. 121, pp 57-66, Dec 2017.
C. Yu and B.W. Schafer, “Distortional buckling tests on cold-formed steel beamsâ€, J. Struct. Eng. ASCE, vol. 132, no. 4, pp 1–14, Apr. 2006.
N. D. Kankanamge and M. Mahendran, “Behaviour and design of cold-formed steel beams subject to lateral–torsional bucklingâ€, Thin-Walled Structures, vol. 51, pp 25-38, 2012.
M. Anbarasu, “Local-distortional buckling interaction on cold-formed steel lipped channel beams, Thin-Walled Structures, vol. 98, Part B, pp 351–359, Jan. 2016.
L. LaÃm, J.P.C. Rodrigues and H.D. Craveiro, “Flexural behaviour of beams made of cold-formed steel sigma-shaped sections at ambient and fire conditionsâ€, Thin-Walled Structures, vol. 87, pp 53-65, 2015.
S. Maduliat, M.R. Bambach, X.L. Zhao, “Slenderness limits for cold-formed channel sections in bending by experimental methodsâ€, Journal of Constructional Steel Research, vol. 76, pp 75-82, 2012.
A. Awaludina, K. Rachmawatia, M. Aryatia and A.D. Danastria, “Development of cold formed steel – timber composite for roof structures: compression membersâ€, Procedia Engineering, vol. 125, pp 850-856, 2015.
I.S. Irawati, A. Awaludin, N.P. Sebastian, “The Performance of Cold-formed Steel Long-span Roof Structure Combined with Laminated Timber: Cold-formed Steel – Laminated Timber Compositeâ€, Procedia Engineering, vol. 171, pp 1242-1249, 2017.
R. Kandasamy, R. Thenmozhi, and L. S. Jayagopal, “Flexural-Torsional Buckling Tests of Cold-Formed Lipped Channel Beams under Restrained Boundary Conditionsâ€, Int. J of Eng and Tech, vol. 6, no.2, pp 1176-1187, Nov. 2014.
Y.H. Lee, Y. L. Lee and C. S. Tan, “Experimental Investigation on Cold-formed Steel Beams under Pure Bendingâ€, Jurnal Teknologi, vol 12, pp 13-21, 2012.
Zaidir, R. Thamrin, E. Dalmantias, “Evaluation of the Pre-Cracked RC Beams Repaired with Sealant Injection Methodâ€, International Journal on Advanced Science, Engineering and Information Technology, vol. 7 no. 2, pp 380-386, 2017.
ASTM, Annual Books of ASTM Standards, Section 3, Metals Test Methods and Analytical Procedures. American Society for Testing and Materials (ASTM), Philadelphia, US: ASTM, 1991.
B. Davison and G.W. Owens, Steel Designers Manual, 6th Edition, Berkshire, US: The Steel Construction Institute, 2003.
Indonesian National Standard for Cold-formed Steel Structures (in Indonesian), SNI 7971, 2013.
Australian/New Zealand Standard for the Design of Cold-formed Steel Structures, AS/NZS 4600, 2005.
North American Specification for the Design of Cold-Formed Steel Structural Members, AISI S100, 2007.
DOI: http://dx.doi.org/10.18517/ijaseit.8.3.4192
Refbacks
- There are currently no refbacks.
Published by INSIGHT - Indonesian Society for Knowledge and Human Development