Produced Water Treatment using Electrocoagulation Combination Method with Aluminum (Al) and Iron (Fe) Electrodes and Activated Carbon Adsorption Treatment

Putra Anugrah, Muhammad Said, David Bahrin

Abstract


Oil is the main source of energy and income for various countries today, and its production has become one of the most important industrial activities in the 21st century. Besides being produced, the oil and gas industry also has a problem with a large volume of waste, and 80% of the liquid waste produced is water, which is also referred to as produced water. Produced water is a by-product of oil and gas processing. This water is different from water because it contains hazardous chemicals and other elements in oil and gas. In this study, a combination of electrocoagulation processes using aluminum (Al) and iron (Fe) electrodes with filtration treatment using activated carbon from a coconut shell, comparing the performance of three processes: electrocoagulation process and adsorption and combination of the electrocoagulation-adsorption process with a continuous process. Electrocoagulation is a process using designed electric currents such as voltmeter circuits with voltage variations of 3, 6, 9, and 12 V, and time variations of 30, 60, 90, 120, and 150 minutes with Al and Fe electrodes were then carried out by their adsorption process using activated carbon from coconut shell waste. The main advantage of this method is the relatively short contact time, and electrode material is easily obtained, and this method is proposed as a substitute for a coagulation system with alum/alum material. The results showed that the decrease in the optimum decrease in COD (98.39%) from the initial content of 737.57 mg/L to 11.90 mg/L, TDS (93.54%) from the initial content of 16,610 mg/L to 1,073 mg/L ammonia (75.16%) from the initial content of 24.24 mg/ L to 6.02 mg/L, oil content (97.56%) from the initial content of 364.2 mg/L to 8.9 mg/L, and phenol (92.5%) from the initial content of 1.20 to 0.09 mg/L. With the optimum voltage parameters at 12 V and a time of 150 minutes. The result achieved in this process is the combination of electrocoagulation and adsorption obtained at 12 V for 150 minutes able to reduce the produced water so that it meets the quality standard by the regulation of the state minister of the environment concerning wastewater quality raw for businesses or oil and gas as well as geothermal activities.

Keywords


Electrocoagulation; adsorption; produced water.

Full Text:

PDF

References


M.K.N. Mahmad, M.AZ.M.R. Rozainy, I. Abustan, N. Baharun, “Electrocoagulation process by using aluminium and stainless steel electrodes to treat total chromium, colour and turbidity,†Procedia Chem., vol 19, pp. 681–686, Mar. 2016. DOI: 10.1016/j.proche.2016.03.070.

P. Myllymäki, R. Lahti, H. Romar, U. Lassi, “Removal of total organic carbon from peat solution by hybrid method – Electrocoagulation combined with adsorption,†J. Water Process Eng., vol. 24, pp. 56–62, Aug. 2018. DOI: 10.1016/j.jwpe.2018.05.008.

T.P. Vu, A. Vogel, F. Kern, S. Platz, U. Menzel, R. Gadow, “Characteristics of an electrocoagulation–electroflotation process in separating powdered activated carbon from urban wastewater effluent,†Sep. Purif. Technol., vol. 134, pp. 196–203, Sep. 2014. DOI: 10.1016/j.seppur.2014.07.038.

S. Jose, L. Mishra, S. Debnath, S. Pal, P.K. Munda, G. Basu, “Improvement of water quality of remnant from chemical retting of coconut fibre through electrocoagulation and activated carbon treatment,†J. Clean. Prod., vol. 210, pp. 630–637, Feb. 2019. DOI: 10./1016/j.jclepro.2018.11.011.

Y.A. Ouaissa, M. Chabani, A. Amrane, A. Bensmaili, “Integration of electro coagulation and adsorpstion for the treatment of tannery wastewaterâ€, Procedia Eng., vol. 33, pp. 98–101, Jan. 2012. DOI: 10.1016/proeng.2012.01.1181.

Y. Meas, J.A. Ramirez, M.A. Villalon, T.W. Chapman, “Industrial wastewater treated by electrocoagulation,†Electrochim. Acta, vol. 55, no. 27, pp. 8165–8171, Nov. 2010. DOI: 10.1016/j.electacta.2010.05.018.

S. Hasiany, E. Noor, M. Yani, “Penerapan produksi bersih untuk penanganan air terproduksi di industri minyak dan gas,†J. Pengelolaan Sumberd. Alam Lingkung., vol. 5, no. 1, pp. 25–32, Jul. 2015.

R. Rusdianasari, J. Jaksen, A. Taqwa, Y. Wijarnako “Effectiveness of electrocoagulation method in processing integrated wastewater using aluminum and stainless steel electrodes,†J. Phys. Conf. Ser., vol. 1167, no. 1 p. 012040, 2019. DOI: 10.1088/1742-6596/1167/1/01204.

I. Kabdaşli, I. Arslan-Alaton, T. Ölmez-Hanci, O. Tünay, “Electrocoagulation application for industrial wastewater: A critical review,†Environ. Technol. Rev., vol. 1, no. 1, pp. 2–45, Nov. 2012. DOI: 10.1080/21622505.2012.715390.

A. de la Luz-Pedro, E.F.M. Prior, M.H. López-Araiza, S. Jaime-Ferrer, A. Estrada-Monje, J.A. Bañuelos, “Pollutant removal from wastewater at different stages of the tanning process by electrocoagulation,†J. Chem., vol. 2019, p. 8162931, Jan. 2019. DOI: 10.1155/2019.8162931.

P. Andarani, A. Rezagama, “Analisis pengolahan air terproduksi di water treating plant perusahaan eksploitasi minyak bumi (studi kasus: PT XYZ),†J. Presipitasi, vol. 12, no. 2, pp. 78–85, Sep. 2015. DOI: 10.14710/presipitasi.v12i2.78-85.

A. Singh, L. Spiccia, “Water oxidation catalysts based on abundant 1st row transition metals,†Coord. Chem. Rev., vol. 257, no. 17–18, pp. 2607–2622, Sep. 2013. DOI: 10.1016/j.ccr.2013.02.027.

A.E. Burakov, E.V. Galunin, I.V. Burakova, A.E. Kucherova, S. Agarwal, A.G. Tkachev, V.K. Gupta, “Adsorption of heavy metals on conventional and nanostructured materials for wastewater treatment purposes: A review,†Ecotoxical. Environ. Saf., vol. 148, pp. 702–712, Feb. 2018. DOI: 10.1016/j.ecoenv.2017.11.034.

G. Xin, “A continuous nanofiltration + evaporation process for high strength rubber wastewater treatment and water reuse,†Sep. Purif. Technol., vol. 119, pp. 19-27, Aug. 2013. DOI: 10.1016/j.seppur.2013.08.036.

A.A. Al-Raad, M.M. Hanfiah, A.S. Naje, M.A. Ajeel, A.O. Basheer, T.A. Aljayashi, M.E. Toriman, “Treatment of saline water using electrocoagulation with combined electrical connecton of electrodes,†Processes, vol. 7, p. 242, Apr. 2019. DOI: 10.3390/pr7050242.

A. Solikhah, R. Rachmaniyah, F. Rokhmalia, “Pemanfaatan ampas tebu sebagai karbon aktif terhadap penurnan kadar COD dan ammonia (NH3) (Studi pada limbah cair insudtri tahu Dinoyo kota Surabaya),†Gema Kesehat. Lingkung., vol. 16, no. 3, pp. 248–254, Apr. 2018. DOI: 10.36568/kesling.v16i3.894.




DOI: http://dx.doi.org/10.18517/ijaseit.12.2.12884

Refbacks

  • There are currently no refbacks.



Published by INSIGHT - Indonesian Society for Knowledge and Human Development