Hydrothermal LiTiO2 Cathode and Polyurethane Binder of High Current Lithium Ion Batteries

Vega Fresamitia Ingried, Sri Haryati, Nirwan Syarif

Abstract


This research is to prepare a lithium-ion battery using carbon-based water spinach rods as anode and LiTiO2 as a cathode. Carbon and LiTiO2 are used as electrodes to produce lithium-ion batteries on a laboratory scale. Carbon derived from water spinach produces more economic value and is easy to obtain. The electrolytes used are liquid and gel-based LiCl with 10%, 20%, and 40% concentrations. The binder used to prepare lithium-ion batteries is a polyurethane (PU) binder. Lithium-ion batteries (LIBs) are arranged as anode-separator/electrolyte-cathode. The battery was tested with a potentiostat in cyclic voltammetry and galvanostatic modes. In cyclic voltammetry measurements, the value of the current in the lithium-ion battery and the plot on the cyclic voltammetric graph can be used to calculate the value of power and energy. Galvanostatic measurement aims to determine the time it takes to charge and discharge the lithium-ion battery. The measurement of cyclic voltammetry on the performance of lithium-ion batteries shows the highest current value found in batteries with a liquid electrolyte media concentration of 40% by 0.18A, while the lowest current value is found in batteries with a 10% concentration gel electrolyte media of 0.004A. The highest power and energy values are found in batteries with a liquid electrolyte media concentration of 20%. The lowest power and energy values are found in batteries with 10% concentration gel electrolyte media. In the galvanostatic measurement, a graph of charging and discharging lithium-ion batteries is produced. The fastest charging slope is in the battery, with a liquid electrolyte media concentration of 40%. The slope discharge of liquid electrolyte media with a concentration of 40% is the fastest compared to other types of batteries. Batteries with 10% concentration gel electrolyte media become the batteries with the longest charging slope and the longest discharge slope compared to other types of batteries.

Keywords


Lithium-Ion Batteries (LIBs); Carbon; LiTiO2; cyclic voltammetry; galvanostatic.

Full Text:

PDF

References


N. Syarif, D. Rohendi, and M. R. Prayogo, “Preparation of Kerosene Soot Carbon Electrode and Its Application in Lithium Ion Battery,†in 2019 6th International Conference on Electric Vehicular Technology (ICEVT), Bali, Indonesia, Nov. 2019, pp. 304–309, doi: 10.1109/ICEVT48285.2019.8993970.

M. Contestabile, S. Panero, and B. Scrosati, “A laboratory-scale lithium-ion battery recycling process,†J. Power Sources, vol. 92, pp. 65–69, 2001.

A. Mishra et al., “Electrode materials for lithium-ion batteries,†Mater. Sci. Energy Technol., vol. 1, no. 2, pp. 182–187, Dec. 2018, doi: 10.1016/j.mset.2018.08.001.

H. Chu, Q. Wu, and J. Huang, “Rice husk derived silicon/carbon and silica/carbon nanocomposites as anodic materials for lithium-ion batteries,†Colloids Surf. Physicochem. Eng. Asp., vol. 558, pp. 495–503, Dec. 2018, doi: 10.1016/j.colsurfa.2018.09.020.

Yohandri, - Zulpadrianto, A. Putra, H. Sanjaya, and J. T. Sri Sumantyo, “A Low-Cost Radar Absorber Based on Palm Shell Active Carbon for Anechoic Chamber,†Int. J. Adv. Sci. Eng. Inf. Technol., vol. 9, no. 6, p. 1976, Dec. 2019, doi: 10.18517/ijaseit.9.6.9961.

J. Lee, Y. Wu, and Z. Peng, “Hetero-nanostructured materials for high-power lithium ion batteries,†J. Colloid Interface Sci., vol. 529, pp. 505–519, Nov. 2018, doi: 10.1016/j.jcis.2018.06.025.

L. Jörissen and H. Frey, “ENERGY | Energy Storage,†in Encyclopedia of Electrochemical Power Sources, Elsevier, 2009, pp. 215–231.

N. F. Syabania, N. Syarif, D. Rohendi, M. Wandasari, and W. D. Rengga, “The Light Transmittance and Electrical Conductivity Properties of Gelam Wood Carbon Nanosheet and Its Derivatives,†Indo J Fund Appl Chem, vol. 4, no. 3, pp. 126–131, 2019.

N. Nitta, F. Wu, J. T. Lee, and G. Yushin, “Li-ion battery materials: present and future,†Mater. Today, vol. 18, no. 5, pp. 252–264, Jun. 2015, doi: 10.1016/j.mattod.2014.10.040.

N. Syarif, I. A. Tribidasari, and W. Widayanti, “Binder-less activated carbon electrode from gelam wood for use in supercapacitors,†J Electrochem Sci Eng, vol. 3, no. 2, pp. 37–45, 2014.

T. Kim et al., “Applications of Voltammetry in Lithium Ion Battery Research,†J. Electrochem. Sci. Technol., vol. 11, no. 1, pp. 14–25, Feb. 2020, doi: 10.33961/jecst.2019.00619.

S. B. Aziz, T. J. Woo, M. F. Z. Kadir, and H. M. Ahmed, “A conceptual review on polymer electrolytes and ion transport models,†J. Sci. Adv. Mater. Devices, vol. 3, no. 1, pp. 1–17, Mar. 2018, doi: 10.1016/j.jsamd.2018.01.002.

S. Farahani, “Battery Life Analysis,†in ZigBee Wireless Networks and Transceivers, Elsevier, 2008, pp. 207–224.

A. Tomaszewska et al., “Lithium-ion battery fast charging: A review,†eTransportation, vol. 1, p. 100011, Aug. 2019, doi: 10.1016/j.etran.2019.100011.

B. S. Vishnugopi, A. Verma, and P. P. Mukherjee, “Fast Charging of Lithium-ion Batteries via Electrode Engineering,†J. Electrochem. Soc., vol. 167, no. 9, p. 090508, Mar. 2020, doi: 10.1149/1945-7111/ab7fb9.

N. Elgrishi, K. J. Rountree, B. D. McCarthy, E. S. Rountree, T. T. Eisenhart, and J. L. Dempsey, “A Practical Beginner’s Guide to Cyclic Voltammetry,†J. Chem. Educ., vol. 95, no. 2, pp. 197–206, Feb. 2018, doi: 10.1021/acs.jchemed.7b00361.

A. Ray, A. Roy, S. Saha, and S. Das, “Transition Metal Oxide-Based Nano-materials for Energy Storage Application,†in Science, Technology and Advanced Application of Supercapacitors, T. Sato, Ed. IntechOpen, 2019.

T. Dobbelaere, P. M. Vereecken, and C. Detavernier, “A USB-controlled potentiostat/galvanostat for thin-film battery characterization,†HardwareX, vol. 2, pp. 34–49, Oct. 2017, doi: 10.1016/j.ohx.2017.08.001.

C. Liu, Z. G. Neale, and G. Cao, “Understanding electrochemical potentials of cathode materials in rechargeable batteries,†Mater. Today, vol. 19, no. 2, pp. 109–123, Mar. 2016, doi: 10.1016/j.mattod.2015.10.009.

T.-S. Chen, S.-L. Huang, M.-L. Chen, T.-J. Tsai, and Y.-S. Lin, “Improving Electrochemical Activity in a Semi-V-I Redox Flow Battery by Using a C–TiO 2 –Pd Composite Electrode,†J. Nanomater., vol. 2019, pp. 1–11, Jan. 2019, doi: 10.1155/2019/7460856.

R. Subramani, Y.-H. Tseng, Y.-L. Lee, C.-C. Chiu, S.-S. Hou, and H. Teng, “High Li + transference gel interface between solid-oxide electrolyte and cathode for quasi-solid lithium-ion batteries,†J. Mater. Chem. A, vol. 7, no. 19, pp. 12244–12252, 2019, doi: 10.1039/C9TA02515D.

J. Menzel, E. Frąckowiak, and K. Fic, “Agar-based aqueous electrolytes for electrochemical capacitors with reduced self-discharge,†Electrochimica Acta, vol. 332, p. 135435, Feb. 2020, doi: 10.1016/j.electacta.2019.135435.

L. S. Roselin et al., “Recent Advances and Perspectives of Carbon-Based Nanostructures as Anode Materials for Li-ion Batteries,†Materials, vol. 12, no. 8, p. 1229, Apr. 2019, doi: 10.3390/ma12081229.

R. Suarez-Hernandez, G. Ramos-Sánchez, I. O. Santos-Mendoza, G. Guzmán-González, and I. González, “A Graphical Approach for Identifying the Limiting Processes in Lithium-Ion Battery Cathode Using Electrochemical Impedance Spectroscopy,†J. Electrochem. Soc., vol. 167, no. 10, p. 100529, Jun. 2020, doi: 10.1149/1945-7111/ab95c7.

H. Lv, X. Huang, and Y. Liu, “Analysis on pulse charging–discharging strategies for improving capacity retention rates of lithium-ion batteries,†Ionics, vol. 26, no. 4, pp. 1749–1770, Apr. 2020, doi: 10.1007/s11581-019-03404-8.




DOI: http://dx.doi.org/10.18517/ijaseit.12.3.12683

Refbacks

  • There are currently no refbacks.



Published by INSIGHT - Indonesian Society for Knowledge and Human Development