The Curing Method Influence on Mechanical Behavior of Reactive Powder Concrete

Ika Bali, Wilson Kurnia

Abstract


The curing method becomes important to be considered in applying the Reactive Powder Concrete (RPC) in the field. Currently, the application of RPC in the field can be simulated with the method of steam curing at 90oC that resulted in compressive strength of 102 MPa. This study used some methods of curing included the method of steam curing at 90oC in order to investigate mechanical behavior of RPC such as compressive, flexural, and splitting tensile strengths. The objective of this research is to obtain the method of in-situ curing which reasonable good in results of the mechanical behavior of RPC. There were 4 types of curing method in this study, namely the steam curing method of 90oC for 8 hours in laboratory (C1), the water curing in laboratory (C2), the in-situ steam curing with flowed steam of 3 hours per day for 7 days (C3), and the in-situ wet curing (C4). This study showed that the compressive, flexural, and splitting tensile strengths of the RPC with in-situ curing method of type C3 compared with the RPC with curing method type C1 have the different of 10.6%, 19.0%, and 13.3%, respectively. The in-situ curing method of type C3 is better than the in-situ curing method of type C4 in term of the strengths.

Keywords


in-situ curing method; mechanical behavior; Reactive Powder Concrete; steam curing

Full Text:

PDF

References


P. Richard, and M. Cheyrezy, ”Composition of Reactive Powder Concrete,” Cement and Concrete Research, vol. 25(7), pp. 1501-1511, 1995.

I. Bali, W. Kushartomo, and Jonathan, Effect of In-Situ Curing on Compressive Strength of Reactive Powder Concrete, MATEC Web of Conferences, vol. 67( 03013), pp. 1-6, 2016.

S. Sarika, and E. John, “A Study on Properties of Reactive Powder,” International Journal of Engineering Research & Technology (IJERT) vol. 4 (11), Nov. 2015.

Concrete N. A. Soliman, and A. T. Hamou, “Using glass sand as an alternative for quartz sand in UHPC,” Construction and Building Materials, vol.145, pp. 243-252, Aug. 2017

V. Vaitkevičius, E. Šerelis, and H. Hilbig, “The Effect of Glass Powder on the Microstructure of Ultra High-Performance Concrete,” Construction and Building Materials, vol. 68, pp. 102-109, 2014.

H. Du, and K.H. Tan, Concrete with Recycled Glass as Fine Aggregates, ACI Materials Journal, vol. 111(1), pp. 47-57, Jan-Feb. 2014.

J.S. Sim, and K.H. Lee, “Sustainable Concrete Technology,” Journal of Civil Engineering Dimension, vol. 17(3), pp.158-165, Dec. 2015.

W. Zhou, H. Hu, and W. Zheng, “Bearing Capacity of Reactive Powder Concrete Reinforced by Steel Fibers,” Construction and Building Materials, vol.48, pp.1179-1186, Nov. 2013.

M. K. Maroliya, “A State of Art - on Development of Reactive Powder Concrete, International Journal of Innovative Research & Development, vol. 1(8), pp.493-503, Oct. 2012.

W. Kushartomo, I. Bali, and B. Sulaiman, “Mechanical Behavior of Reactive Powder Concrete With Glass Powder Substitute,” Procedia Engineering, vol. 125, pp. 617-622, 2015.

H.S. Chore, P.A. Dode, and N.L. Shelke, “Compressive Strength of Fiber Reinforced Fly-Ash Concrete using Regression Model,” International Journal on Advanced Science, Engineering and Information Technology (IJASEIT), vol.1 (6), pp.602-606, 2011.

F. Raupit, A Saggaff, C.S. Tan, Y.L. Lee, and M.Md. Tahir, “Splitting Tensile Strength of Lightweight Foamed Concrete with Polypropylene Fiber,” International Journal on Advanced Science, Engineering and Information Technology (IJASEIT), vol.7 (2), pp.424-430, 2017.

M. Ženíšek, T. Vlach, and L. Laiblová, ”Flexural Strength of the Reactive Powder Concrete,’ Solid State Phenomena, vol. 249, pp.108-111, April 2016.

ASTM C39 / C39M-17b, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA, 2017.

ASTM C78 / C78M-16, Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading), ASTM International, West Conshohocken, PA, 2016.

ASTM C496-96, Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA, 1996.

M. K. Maroliya, “Micro Structure Analysis of Reactive Powder Concrete,” International Journal of Engineering Research & Development, vol. 4(2), pp.68-77, Oct. 2012.




DOI: http://dx.doi.org/10.18517/ijaseit.8.5.4197

Refbacks

  • There are currently no refbacks.


Published by INSIGHT - Indonesian Society for Knowledge and Human Development