A Value-Based Decision-Making Model for Selecting Sustainable Materials for Buildings

Amirul Afiq Bin Ruslan, Ezzaddin Abdullah Ali Al-Atesh, Yani Rahmawati, Christiono Utomo, Noor Amila Wan Abdullah Zawawi, Mohamad Jahja, - Raflis, Ali Elmansoury

Abstract


Nowadays, the earth faces problems and challenges from different circumstances due to the dramatic rise of urban modernization. The construction industry is the most contributor to climate change. Achieving sustainability in construction is complicated, but one of the most optimal strategies is selecting building materials with a lower carbon footprint. Therefore, this research aims to investigate the criteria for sustainable materials selection, rank and prioritize sustainable criteria, and developing value-based decision making. A mixed method was used to satisfy the objectives through an extensive literature review, surveys, and interviews with experts. The statistical descriptive was based on a scatter plot of mean and standard deviation, AHP judgment and Value-based decision-making using function over cost. There are two alternatives obtained in this study: Aluminum Composite Panel (ACP) and Stainless Steel. As a result, the suitable alternative for sustainable façade material is ACP based on value-based calculation. The tendency of choosing sustainable material depends on the stakeholders, owner of the building, designers, and others. The research is to show the way in selecting sustainable material by using value-based analysis. This study could expect to give feasibility and useful knowledge in solving problems and increase the use of sustainable materials in building construction. Future research may be conducted with different requirements for sustainable materials. AHP and Value-based analysis are structured technique that solves a complex problem easily using mathematics and psychology approach.

Keywords


Sustainable façade material; materials selection; decision making; building industry.

Full Text:

PDF

References


A. F. Kineber, I. Othman, A. E. Oke, N. Chileshe, and M. K. Buniya, “Identifying and assessing sustainable value management implementation activities in developing countries: The case of Egypt,†Sustain., vol. 12, no. 21, pp. 1–20, 2020, doi: 10.3390/su12219143.

A. E. Oke, A. F. Kineber, I. Albukhari, I. Othman, and C. Kingsley, “Assessment of cloud computing success factors for sustainable construction industry: The case of Nigeria,†Buildings, vol. 11, no. 2, pp. 1–15, 2021, doi: 10.3390/buildings11020036.

S. O. Ajayi, L. O. Oyedele, B. Jaiyeoba, K. Kadiri, and S. A. David, “Are sustainable buildings healthy? An investigation of lifecycle relationship between building sustainability and its environmental health impacts,†World J. Sci. Technol. Sustain. Dev., 2016.

A. F. Kineber, I. Othman, A. E. Oke, N. Chileshe, and B. Alsolami, “Critical Value Management Activities in Building Projects: A Case of Egypt,†Buildings, vol. 10, no. 12, p. 239, 2020.

L. C. M. Eberhardt, M. Birkved, and H. Birgisdottir, “Building design and construction strategies for a circular economy,†Archit. Eng. Des. Manag., pp. 1–21, 2020.

F. Krausmann, S. Gingrich, N. Eisenmenger, K.-H. Erb, H. Haberl, and M. Fischer-Kowalski, “Growth in global materials use, GDP and population during the 20th century,†Ecol. Econ., vol. 68, no. 10, pp. 2696–2705, 2009.

E. Al-Atesh, Y. Rahmawati, and N. A. W. A. Zawawi, “Sustainability Criteria for Green Building Material Selection in the Malaysian Construction Industry,†in Proceedings of the International Conference on Civil, Offshore and Environmental Engineering, 2021, pp. 693–700.

V. Hoxha, T. Haugen, and S. Bjorberg, “Measuring perception about sustainability of building materials in Kosovo,†Facilities, 2017.

I. Othman, A. F. Kineber, A. E. Oke, T. Zayed, and M. K. Buniya, “Barriers of value management implementation for building projects in Egyptian construction industry,†Ain Shams Eng. J., vol. 12, no. 1, pp. 21–30, 2021, doi: 10.1016/j.asej.2020.08.004.

M. K. Buniya, I. Othman, R. Y. Sunindijo, A. F. Kineber, E. Mussi, and H. Ahmad, “Barriers to safety program implementation in the construction industry,†Ain Shams Eng. J., vol. 12, no. 1, pp. 65–72, 2021, doi: 10.1016/j.asej.2020.08.002.

M. K. Buniya, I. Othman, S. Durdyev, R. Y. Sunindijo, S. Ismail, and A. F. Kineber, “Safety program elements in the construction industry: The case of Iraq,†Int. J. Environ. Res. Public Health, vol. 18, no. 2, pp. 1–13, 2021, doi: 10.3390/ijerph18020411.

E. Bakogiannis et al., “Exploring Motivators and Deterrents of Cycling Tourism Using Qualitative Social Research Methods and Participative Analytical Hierarchy Process (AHP),†Sustainability, vol. 12, no. 6, p. 2418, 2020.

Y. Rahmawati, C. Utomo, N. S. Muhamad Sukri, R. B. Yasinta, and A.-H. M. H. Al-Aidrous, “Environmental Enhancement through High-Rise Building Refurbishment,†Sustainability, vol. 12, no. 22, p. 9350, 2020.

Z. Xu et al., “Assessing progress towards sustainable development over space and time,†Nature, vol. 577, no. 7788, pp. 74–78, 2020.

A. F. Kineber, I. Othman, A. E. Oke, N. Chileshe, and M. K. Buniya, “Impact of Value Management on Building Projects Success: Structural Equation Modeling Approach,†J. Constr. Eng. Manag., vol. 147, no. 4, p. 4021011, 2021.

R. W. Bentley, “Global oil & gas depletion: an overview,†Energy Policy, vol. 30, no. 3, pp. 189–205, 2002.

N. Stern and N. H. Stern, The economics of climate change: the Stern review. cambridge University press, 2007.

C. P. Hodges, “A facility manager’s approach to sustainability,†J. Facil. Manag., 2005.

A. F. Kineber, I. Othman, A. E. Oke, N. Chileshe, and T. Zayed, “Prioritization of value management implementation critical success factors for sustainable residential building: A structural equation modelling approach,†J. Clean. Prod., p. 126115, 2021.

M. Anderson, M. Mckee, and E. Mossialos, “Developing a sustainable exit strategy for COVID-19: health, economic and public policy implications,†J. R. Soc. Med., vol. 113, no. 5, pp. 176–178, 2020.

V. J. L. Gan, I. M. C. Lo, J. Ma, K. T. Tse, J. C. P. Cheng, and C. M. Chan, “Simulation optimisation towards energy efficient green buildings: Current status and future trends,†J. Clean. Prod., vol. 254, p. 120012, 2020.

F. F. Abdel-malak, U. H. Issa, Y. H. Miky, and E. A. Osman, “Applying decision-making techniques to Civil Engineering Projects,†Beni-Suef Univ. J. basic Appl. Sci., vol. 6, no. 4, pp. 326–331, 2017.

P. O. Akadiri and P. O. Olomolaiye, “Development of sustainable assessment criteria for building materials selection,†Eng. Constr. Archit. Manag., 2012.

K. Krueger, A. Stoker, and G. Gaustad, “‘Alternative’ materials in the green building and construction sector,†Smart Sustain. Built Environ., 2019.

V. Hoxha and F. Shala, “The benefits and challenges of sustainable buildings in Prishtina, Kosovo,†Facilities, 2019.

J. Jailani, R. Reed, and K. James, “Examining the perception of tenants in sustainable office buildings,†Prop. Manag., 2015.

O. Oduyemi and M. Okoroh, “Building performance modelling for sustainable building design,†Int. J. Sustain. Built Environ., vol. 5, no. 2, pp. 461–469, 2016.

S. Mahmoudkelaye, K. T. Azari, M. Pourvaziri, and E. Asadian, “Sustainable material selection for building enclosure through ANP method,†Case Stud. Constr. Mater., vol. 9, p. e00200, 2018.

H. Danso, “Identification of key indicators for sustainable construction materials,†Adv. Mater. Sci. Eng., vol. 2018, 2018.

M. A. B. Omer and T. Noguchi, “A conceptual framework for understanding the contribution of building materials in the achievement of Sustainable Development Goals (SDGs),†Sustain. Cities Soc., vol. 52, p. 101869, 2020.

F. Orsini and P. Marrone, “Approaches for a low-carbon production of building materials: a review,†J. Clean. Prod., vol. 241, p. 118380, 2019.

O. A. B. Hassan, “An integrated approach to assessing the sustainability of buildings,†J. Eng. Des. Technol., 2016.

K. Mathiyazhagan, A. Gnanavelbabu, and B. L. Prabhuraj, “A sustainable assessment model for material selection in construction industries perspective using hybrid MCDM approaches,†J. Adv. Manag. Res., 2019.

C. Utomo and Y. Rahmawati, “A Concept of Value and Sustainable Performance On Affordable High-Rise Residential Decision,†in MATEC Web of Conferences, 2018, vol. 203, p. 2013.

I. Othman, A. F. Kineber, A. E. Oke, N. Khalil, and M. K. Buniya, “Drivers of Value Management Implementation in Building Projects in Developing Countries,†J. Phys. Conf. Ser., vol. 1529, no. 4, 2020, doi: 10.1088/1742-6596/1529/4/042083.

I. Othman, M. Kamil, R. Y. Sunindijo, M. Alnsour, and A. F. Kineber, “Critical success factors influencing construction safety program implementation in developing countries,†J. Phys. Conf. Ser., vol. 1529, no. 4, 2020, doi: 10.1088/1742-6596/1529/4/042079.

V. W. Y. Tam, K. N. Le, and J. Y. Wang, “Cost Implication of Implementing External Facade Systems for Commercial Buildings,†Sustainability, vol. 10, no. 6, p. 1917, 2018.

M. T. Naqash, A. Formisano, and G. De Matteis, “Aluminium framing members in facades,†in Key Engineering Materials, 2016, vol. 710, pp. 327–332.




DOI: http://dx.doi.org/10.18517/ijaseit.11.6.14411

Refbacks

  • There are currently no refbacks.


Published by INSIGHT - Indonesian Society for Knowledge and Human Development